Instrument
|
Steel-String Acoustic Guitar |
|
Pickup |
TWIN SoundSpot NTX |
Position |
Inside the guitar under the bridge |
Applying
The
Pickup |
The metal side of each pickup disc is stuck to the guitar’s inside surface using double-sided adhesive tape. Position the pickups as shown for balanced treble/bass-string pick-up and maximum prevention of feedback. Note: Because you have to work with your hand inside the soundhole, you can’t see what you’re doing; therefore, you can find you bearings by feeling for the holes that the strings pass through. |
Jack |
Use a 1/4″ endpin output jack. |
Usage Tips |
The TWIN SoundSpot NTX works well with all guitar and keyboard amps, as well as P.A. systems and recording mixers. For added control over the instrument’s tone, use a high-quality preamp. For P.A. and recording applications, a high-quality direct box such as as the D-TAR Solstice or Equinox is suggested. |
Cutaway view shows the two pickup discs mounted inside the guitar and connected to the endpin jack. |
|
|
Installation of the endpin jack requires removing the original endpin and drilling the hole larger in order to accommodate the increased diameter. |