- Views 0
- Likes 0
Déjà vu 包含了標準的wet/dry 混合控制(blend control)以及可以調整的delay時間。另外也有類比/數位的混合控制,能夠在溫暖真實的delay與數位微處理器為基礎的數位clean sound delay之間找到最想要的音色。同時也有回授控制(feedback control),讓你能夠產生類比的錄音帶迴聲。
SFX-10 – Deja Vu Tap Delay
SpecificationsInput Impedance: 1 Megohm (1000K ohms)
Output Impedance: 1K ohm (1000 ohms)
Battery Life: 10 hours with premium alkaline battery
Power source: 9V battery or external 9VDC regulated
wall transformer with center pin negative. Current drain
50mA.
Delay time: 32ms to 2.6 seconds
Regeneration: Continuously adjustable from “off” to
runaway build-up
Analog Delay Element: NMOS Bucket Brigade Device
(BBD)
Digital Delay Element: Microprocessor-controlled 24
bit Codec and SDRAM
Output Clipping Level: 7V Peak-to-Peak
Dynamic Range: Dry Signal 116dB; Digital Delay
93dB; Analog Delay 60dB
Noise Referred to Input: Dry Signal -110dBV
Delay Ratio Multipliers: 1, 1.33 (dotted eighth note),
2, 3, 4
Distortion: Dry Signal 0.003%; Digital Delay; Analog
Delay 0.08%
Nominal Gain: 1:1
Bypass Type: Switch selectable between hardwire true
bypass and electronically switched trailing repeats