20100615190719

Seymour Duncan Bass SoundSpot

種類 D-TAR系列
販售經銷商
Instrument 

 

Double Bass (String Bass) or Cello

 20100615190616 20100615190710
Pickup BASS SoundSpot
Position In one of the bridge’s cutouts
Applying
The
Pickup
Wedge the pickup disc into one of the large cutouts in the bridge. If there’s too much space for a snug fit, wedge a piece of veneer between the pickup and the points at which the pickup should contact the bridge. If the space is to small for the pickup, file a little bit of the bridge, check to see if the pickup fits, and repeat if necessary. Remember: Only file a small amount at a time.
Note: To prevent rattling sounds from making their way into the pickup, make sure that the wire leading to the pickup doesn’t contact any of the instrument’s surfaces.
Jack The 1/4″ jack is attached to the tailpiece using a self-adhesive dual-lock hook-and-loop strip.
Usage Tips Set your amp’s tone to suit your taste. This pickup is designed for full response regardless of whether you play arco (bowed) or pizzicato (plucked). Any full-range amp or P.A. system can be used with the BASS SoundSpot. However, the best frequency response will be obtained by using a buffering preamp with a high output impedance. Naturally, the low frequencies will require plenty of support, so larger speakers or enclosures tailored to emphasize low end are recommended.
For convenient equalization or for P.A. or recording work, a direct box, is an excellent way to interface the pickup and other gear. For P.A. and recording applications, a high-quality direct box such as as the D-TAR Solstice or Equinox is suggested.

 


%d 位部落客按了讚: